The concentration of alcohol in saliva is very close to that in the blood, for that reason it is more accurate than the other types of tests. Our Alcohol Saliva test is intended for use as a rapid, highly sensitive alcohol test to detect the presence of alcohol in saliva and to provide an approximation of blood alcohol concentration. It may also be used to non-quantitatively detect the presence of alcohol in many other fluids, such as soft drinks, blood serum, water, etc. It was designed and patented in 1988 as a simple, cost-effective solution to screen for alcohol concentrations. With over 10 million tests, our test has proven to be the leading alcohol screening device in the field. Alcohol Saliva test is very sensitive because it indicates alcohol levels from 0.02% to 0.30% and requires no instrumentation or training. Saliva test can be used at any time, anywhere each in its individual and disposable package.

Just wet the test pad with your saliva, and get results in 2 minutes. No need for laboratory analysis. Each Alcohol test kit is packaged individually in a sterile pouch bag.

UrineCheck 6 is based on detection methods that can identify the presence of additives, adulterants and masking agents that are added to urine.

UrineCheck 6 Drug Adulteration Test Strip:

Creatinine: Testing for sample dilution. In this assay, creatinine reacts with a creatinine indicator under alkaline conditions to form a purplish-brown color complex. The concentration of creatinine is directly proportional to the color intensity of the test pad.

Glutaraldehyde: Testing for the presence of exogenous aldehyde. In this assay, the aldehyde group on the glutaraldehyde reacts with an indicator to form a pink color complex.

Nitrite: Testing for the presence of exogenous nitrite. Nitrite reacts with an aromatic amine to form a diazonium compound in an acid medium. The diazonium compound, in turn, couples with an indicator to produce a pink-red color

Oxidants: Testing for the presence of oxidizing reagents. In this reaction, a color indicator reacts with oxidants such as bleach, hydrogen peroxide or pyridinium chlorochromate to form a blue color complex. Other colors may indicate the presence of other oxidants.

pH: Testing for the presence of acidic or alkaline adulterant. This test is based on the well-known double pH indicator method that gives distinguishable colors over a wide pH range. The colors range from orange (low pH) to yellow and green to blue (high pH).

Specific Gravity: Testing for sample dilution. This test is based on the apparent pKa change of certain pretreated polyelectrolytes in relation to the ionic concentration. In the presence of an indicator, the colors range from dark blue or blue-green in urine of low ionic concentration to green and yellow in urine of higher ionic concentration

The United States Department of Transportation (DOT) has determined that individuals with a commercial drivers license and those in safety sensitive occupations must not exceed the "zero tolerance" level (alcohol concentrations above 0.02%). Beginning in 1996, all transportation and safety sensitive employers will be required to comply with the DOT's alcohol testing regulations. Our Alcohol Saliva test is the simplest, most cost effective method of monitoring for alcohol consumption in your ZERO TOLERANCE testing program. This Alcohol Saliva test is so effective that it has been tested and approved by the US Department of Transportation (DOT) for required testing of all transportation and safety sensitive employees for blood alcohol concentrations above the federally mandated zero tolerance level of 0.02%. As the concentration of alcohol in saliva is very close to that in the blood, for that reason Alcohol Saliva test is more accurate than the other types of tests. It identifies the alcohol levels greater than 0.02% and works in a clean, non-invasive manner and provides results in 4 minutes.

Alcohol Saliva test can be used at any time, anywhere in their individual and disposable package. Simply wet the test pad with your saliva, and get results in 4 minutes. No need for laboratory analysis. Each test kit is packaged individually in a sterile pouch bag.